Ignition switch saver

Written by Backinblack, Member 5888
Applies to the following vehicles: 1997 - 2003 Grand Prix
Created 8/27/2011

Write-Up Rating
Rated by 1 members

Save your ignition switch contacts from an untimely death or even fix the condition if your current contacts are just beginning to fail your HUD DIC and HVAC systems.

Use 10-12AWG stranded wire for the jumper to the 12v constant wire. Basically the original ignition switch contacts for the hight current accessory circuit now only power a single relay. The new relay now carries the current and is EASILY replaceable should it ever fail.

The whole procedure takes about 30 minutes.

Your Rated this Write-Up

About Us | 1/4 Mile Times | Advertisers | GP Info | Books | Chat/IRC | ClubGP Info
ClubGP Donations | Free Email | Message Forum | Nat'l Gathering | Owners Registry | Parts List | Photo Albums |
Raffles | GPX Info | Contact Us | Upgrades | Voting Booth | Web Links | Web Ring | Terms of Use

NovoWorks, LLC
ClubGP & ClubG8 is a service of FXOL
Copyrights 1997-2010 FXOL. All rights reserved.